Clearwater · Water Softeners
Water Softener Installation
in Clearwater.
Spots on the glasses, scale on the fixtures, soap that never rinses clean? That is hard water — and a properly sized softener ends it. We install across Clearwater after a free in-home test.
4.7★ from 205 Google reviews · WQA Gold Seal Puronics dealer · Our own techs, no subcontractors
Request your free water test
★★★★★ 4.7 — a few details and we reach out, usually same day.
Our install · a real job, not stock
Why Clearwater homes need a water softener
Clearwater runs on hard, treated water from the regional Tampa Bay Water supply. That hardness spots your glasses, scales your water heater, films your skin and quietly shortens the life of every water-using appliance. A properly sized softener reduces it at the source, for the whole house.
What is actually in Clearwater’s water
Not our numbers — your utility’s own. Every figure below is reported with the legal limit beside it, and where Pinellas County Utilities does not publish something, we say so instead of filling in a guess.
| What | Published figure | Against the limit |
|---|---|---|
| Total hardness | 9.8–14.7 grains per gallon | 210 ppm average, range 168–252 |
| Disinfectant | Chlorine and chloramines | 3.8 ppm highest annual average |
| Semiannual conversion | Twice a year | temporarily switched to free chlorine — taste and smell change |
| Radium 226+228 | 2.5 pCi/L | MCL 5 pCi/L — half the limit, highest on our map |
| TTHM | 42.1 ppb | MCL 80 ppb — under |
| PFAS | Not detected | county’s own report |
Source: Pinellas County Consumer Confidence Report. Supplier: Pinellas County Utilities (PWS FL6521405). Disinfectant: Chlorine and chloramines.
What that means for a system in Clearwater
Two things matter in Clearwater. The first: hardness runs 9.8 to 14.7 grains — a 210 ppm average with a range from 168 to 252. That is a wide spread, which is exactly why sizing to your address rather than a city average matters.
The second is the one nobody explains. Pinellas runs a scheduled switch from chloramine to free chlorine twice a year, for a few weeks at a time. Your water suddenly smells and tastes different, nothing is wrong, and most people never find out why. The county publishes the windows in advance. Carbon handles both forms, which is the point.
Radium here is 2.5 pCi/L — half the federal limit, not a violation, and the highest on our map. Radium reduction is an elective certified claim under NSF/ANSI 44, so a softener can be certified for it. Most are not.
Installing in Clearwater
Clearwater is served partly by the city’s own system and partly by Pinellas County — your bill says which. Housing runs from mid-century block homes to beach condos, so the install is either a simple garage job or an association conversation. We work that out on the visit.
We install and service throughout Clearwater, Clearwater Beach, Countryside, Morningside and Safety Harbor. The water test is free and there is no obligation attached to it — it is simply the only honest way to size a system.
Not sure which system you need? The full buyer’s guide walks through it →
How our install works
Every install starts with a free in-home water test, so your system is sized to your actual water — never a one-size-fits-all box. Your own local Hydrology tech tests, recommends and installs it, start to finish, with clean, careful plumbing. If a job needs a permit, we bring in the licensed plumber we work with.
Local, start to finish
Clearwater splits between the city’s own system and Pinellas County, and between older block homes and beach condos, so we ask a few questions before quoting. Puronics for a certified finished system with a manufacturer warranty on paper; our own value-built option when that suits better. You see both numbers.
Clearwater water guides
What your neighbors say
4.7★ from 205 Google reviews.
“I cannot say enough amazing things about this company and system! We had three companies come out and Hydrology stood out on every level.”
“We’ve had our system now a month and absolutely love it. My wife is a hair beautician with over 30 years of experience and definitely can tell the difference with the water.”
“Wow, I can definitely feel a difference in my hair, skin, and when I wash my hands. I knew getting a water softener was a priority and I’m so glad I decided to go with Hydrology.”
Every review is on our Google profile — read all of them there. We don’t cherry-pick; we just answer the phone.
Common questions
What people here
ask us first.
Straight answers about the water at your address.
How hard is Clearwater water?
Pinellas County reports a 210 ppm average with a range from 168 to 252 — about 9.8 to 14.7 grains per gallon. That spread is wide enough that a city average is not a sizing number. We measure at your address.
Why does my water smell and taste different a few weeks a year?
Because it is. Pinellas runs a scheduled switch from chloramine to free chlorine twice a year, for a few weeks each time, and publishes the windows in advance. Nothing is wrong and most people never find out why it happened. Carbon handles both forms, which is rather the point of having it.
What is radium and should I worry about it here?
Pinellas reports combined radium at 2.5 pCi/L against a limit of 5 — half the limit, not a violation, and the highest figure on our service map. Worth knowing because radium reduction is an elective certified claim under NSF/ANSI 44. A softener can be certified for it; most are not, so it is a fair question to ask whoever quotes you.
Salt-free or salt-based — which should I get?
Salt-based systems truly soften; salt-free systems condition. We walk you through which fits after testing.
How long does a softener install take?
Most installs are done in a few hours by your own local tech, with clean plumbing.
